High-speed drilling and tapping machine series DT

DT series is specially designed to meet the needs of users on the market for high speed, high productivity vertical drilling and tapping center The overall layout of the drilling and tapping center is a vertical frame structure, which can withstand the heavy load during processing, and can maintain no vibration and deformation when moving at a high-speed, which is suitable for processing automobiles, motorcycle acces sories and small generator accessories

The base of the fuselage is wide and the column is a box structure. The saddle is widened and lengthened, and the heavy load is fully supported.

The fuselage is subjected to multiple heat treatments, and the accuracy of the whole machine is effective and steady,ensuring high-precision displacement performance.

The large-span base is solid with an eight-point support structure and has high rigidity and high shock-resistant. High-precision, high-speed, high-efficiency continuous processing, user-friendly dialogue interface, easy to operate.

The machine tool chipping removal adopts the rear discharge design, which enjoys the best chipping removal angle and super large flow chipping system.

 

 

Technical Parameters
Item DT 500 DT 600S DT 600 DT 600/40 DT 700/40
X-axis stroke mm 500 600 600 650 700
Y-axis stroke mm 400 400 400 450 450
Z-axis stroke mm 300 330 350 360 500
Size of the table (Length x width) mm 650*400 700*420 700*420 650*380 850*440
Table T-slot(number,size,spacings) mm 3-14*125 3-14*125 3-14*125 3-14 4-18
Workpiece loading capacity kg 250 250 350 450 500
Control system optional FANUC/MITSUBISHI FANUC/MITSUBISHI  MITSUBISHI M80 or FANUC 01 MF HNC/FANUC/

MITSUBISHI

 HNC/FANUC/

MITSUBISHI
Spindle taper  BT30 BT-30 BT-30 BT40 BT40
Spindle speed rpm 20000 50-20000 20000 8000 8000
Spindle nose to table surface mm 150-450 150-480 145-495 110-470 130-630
Spindle centerline to column mm 420 464 420 485 500
Spindle motor power kw 3.7 3.7/5.5  5.5 5.5 5.5
3-axis motor power(X/Y/Z) kw 1.5/1.5/2.2 1.5/2.0/3.0
X/Y/Z axis rapid traverse m/min 48/48/48 48/48/48 48/48/48 48/48/48 48/48/48
Cutting feed speed mm/min 10/10/10 1-10000 10-8000 5000 5000
Positioning accuracy mm 0.008/300 0.01 0.005/300 0.015/300 0.015/300
Repeatability accuracy mm 0.005/300 0.006 0.003/300 0.005 0.005
Tool magazine pcs 16T(21T) 16T(21T) 16T(21T) 16T(24T) 16T(24T)
Machine weight kg 2800 2900 3500 3200 3600
Machine dimension(Length* width* height) mm 1650*2150*2400 1760*2320*2240 1900*2330*2500 2200*2200*2300 2300*2200*2300
Technical Parameters
Item DT800 DT1000 DT1350 DT1850 DT2500
X-axis stroke mm 800 1000 1300 1800 2050
Y-axis stroke mm 500 500 520 520 520
Z-axis stroke mm 330 330 450 450 450
Size of the table (Length x width) mm 1000*500 1100*500 1300*500 1900*500 2000*500
Table T-slot(number,size,spacings) mm 5-18*100 5-18*100 3-18*125 3-18*125 3-18*125
Workpiece loading capacity kg 300 350 500 500 500
Control system optional FANUC/MITSUBISHI FANUC/MITSUBISHI  MITSUBISHI M80 or FANUC 01 MF MITSUBISHI M80 or FANUC 01 MF MITSUBISHI M80 or FANUC 01 MF
Spindle taper BT-30 BT-30 BT-30 BT-30 BT-30
Spindle speed rpm 50-20000 50-20000 20000 20000 12000
Spindle nose to table surface mm 160-490 155-485 120-570 120-570 120-570
Spindle centerline to column mm 546 546 550 550 550
Spindle motor power kw 5.5 5.5 5.5 5.5 5.5
3-axis motor power(X/Y/Z) kw 3.0/3.0/3.0 3.0/3.0/3.0 3.0/3.0/3.0
X/Y/Z axis rapid traverse m/min 48/48/48 48/48/48 48/48/48 48/48/48 36/36/48
Cutting feed speed mm/min 1-10000 1-10000 10-8000 10-8000 10-8000
Positioning accuracy mm 0.01 0.01 0.005/300 0.005/300 0.005/300
Repeatability accuracy mm 0.006 0.006 0.003/300 0.003/300 0.003/300
Tool magazine pcs 16T(21T) 16T(21T) 16T(21T) 16T(21T) 16T(21T)
Machine weight kg 4000 4500 5600 6500 6800
Machine dimension(Length* width* height) mm 2480*2540*2440 2750*2380*2440 3050*2600*2750 4200*2800*2750 4200*2800*2750